2 Port Fiber Optical Network Series Node Video Optical Terminal

Product Overview

Global Tech GT-VO-2 series Node Optical Video Terminal integrates digital non-compressed video signal process, TDM and WDM technologies. Over only one fiber, GT-VO-2 can construct multi-node chain network and transport up to 16 channel digital non-compressed video signals simultaneously. GT-VO-2 consists of 2 types of NE: Remote CPE and Central Office. Remote CPE is designed as desktop standalone or chassis architecture, and Central Office type is standard 1U chassis design. Central Office product can provide 8/10 route video output, 2 route 10M/100M Ethernet with Layer-2 switch, 1/2 route shared data and 16 route point-to-point audio/data/switch signal optionally. Remote CPE device can provide 1~5 route video input, 2 route 10M/100M Ethernet interface with L2 switch, 1/2 route shared data and 5 route point-to-point audio/data/switch signal optionally.

Features

• 8/10 channel digital non-compressed real-time video transmission.
• Line protection function: During Power Failure or NE Failure, Optical Line Protection function is automatically activated to ensure the link transmission next to the failed NE and enhance the system security and reliability.
• Remote CPE supports real-time software configuration.
• Maximum single span distance is up to 80km. And each node has a regeneration function, extending the whole link to the distance 800km maximum.
• Through Network Management System GUI and the whole network topology, configuration, fault and log management, increase the efficiency in deployment, maintenance and management for the end user.
• All series of products pass the Ministry of Public Security Type Test and get the Network Access License from the Ministry of Industry and Information Technology.

Technical Parameters

Optical Interface

• Working Wavelength: 1310nm, 1510nm, CWDM
• Tx Power: 0dBm~ -5dBm
• -8dBm~ -15dBm
• Rx Sensitivity: -24dBm/ -27dBm, APD

Video Interface

• Video Channels:
• Remote CPE: 1~ 5 channel input,
• Central Office: 8/10 channel output
• Sampling Frequency: 16MHz
• Sampling Coding: 8bit/ 10bit
• Video Pattern: PAL, NTSC, SECAM auto-adapted
• In/Output Impedance: 75Ω
• In/output Voltage: 1Vp-p
• In Overload Voltage: 1.5Vp-p
• Insertion Gain: 1+5%
• Input Bandwidth: 5Hz~8MHz
• Differential Gain: ≤1%
• Differential Phase: ≤1°
• SNR: ≥67dB, Weighted
• Connector Type: BNC

Data Interface

• Data Format: Bi-direction Data RS232/422/485, optional
• Baud Rate: 0~ 115.2Kbps
• Total Sampling Rate: 2MHz
• Error Rate: <10e-9
• Connector Type: PHOENIX

Ethernet Interface

• 10M/ 100M auto negotiation
• Connector: RJ45

Operation Environment

• Working Temperature: 0°C~ 50°C
• Storage Temperature: -40°C~ 75°C
• Relative Humidity: 95%, non-condensing
• No corrosive and solvent gas, no dust and heavy EMI
• EMC: Comply with GJB151A-97, IEC61000-4-2/3/4/5/11
• Power Supply:Central Office: AC 220V,CPE: DC 5V

Typical Consumption:

• Central Office: ≤ 20W
• CPE: ≤ 8W

Physical Dimension:

• Central Office Chassis:482mm(W)* 44mm(H)* 292mm(D)
• CPE Standalone:210mm(W)* 36mm(H)* 135mm(D)

Application Diagram

fiber media converter

e1 converter fiber

2 Port Fiber Optical Network Series Node Video Optical Terminal Images